渭河盆地地温场分布规律及其控制因素     

任战利  刘润川  任文波  祁凯  杨桂林  崔军平  杨鹏  张园园 《地质学报》2020,94(7):1938-1949

本文以渭河盆地地温场为研究对象,在收集补充新地热井资料及分析测试样品的基础上,通过盆地深部结构、构造特征、地温场特征、热储层特征、地热资源量等分析,建立了盆地不同岩性岩石热导率与深度关系图版,确定了盆地地温场变化规律及地热田控制因素,提出了渭河盆地地热田形成模式。评价了盆地地热资源有利区,为盆地后续的开发利用提供了理论支持。研究认为渭河盆地热地温梯度分布在2.34～5.85℃/100m之间,平均地温梯度为3.50℃/100m,代表性大地热流68.33mw/m~2,地温梯度及不同深度地层温度具有东高西低、南高北低的特点。热导率总体上具有随深度的增加,逐渐增大的规律,热导率随深度增加主要受压实程度增强控制。相同深度条件下泥岩热导率最低,砂岩热导率居中、白云岩热导率最高。渭河盆地主要为层状地热田,盆地内地热通过热传导及热对流两种方式进行传递,以热传导为主。渭河盆地地热资源丰富,热储层可分为三种类型:①新生界砂岩孔隙型;②下古生界碳酸盐岩岩溶型;③断裂型。渭河盆地地热资源有利区主要分布于西安凹陷、固市凹陷。盆地地温场及地热田分布与莫霍面、软流圈上隆、岩石圈厚度减薄的深部背景密切相关,主要受地热传导和深大断裂热对流控制,是岩石圈深部结构、盆地构造、基底岩性、储盖组合等多因素共同作用下形成的。最后结合当前渭河盆地地热资源开发利用现状及存在问题,提出了地热开发利用建议。  相似文献   

基于空间插值的浙江省城市流时空演变特征研究          下载免费PDF全文

魏国恩  贺清云  朱翔  欧阳晓 《干旱区地理》2019,42(1):215--222

为了探寻发达省份内城市间相互作用的时空特征，该文以浙江省为样本单元，选取2005、2010年和2015年3个时间截面，采用反距离权重法和空间插值手段，从城市流强度视角展开了实证分析。结果表明：（1） 城市间的联系在不断加强，期间城市流强度值随时间的推移而整体得到提升，空间上由初始的“中心点”通过发展扩散向“中心域”转变，中心城市的辐射带动作用开始发挥成效。（2）结构上呈现出相对稳定的北高南低的分布格局，以杭州市为龙头，宁波为副核心，温州、绍兴、舟山为重要节点的多中心城市网络结构雏形初步形成。（3） 城市流强度的空间分异特征分析明显，但分异程度有了些许的改善，侧面说明空间上由初始的“中心点”通过发展扩散向“中心域”转变的基本观点。最后就浙江省如何加强省内城市间“流”的规模性、区域协调性和可持续性展开了讨论。  相似文献   

Quantifying flow resistance in mountain streams using computational fluid dynamics modeling over structure-from-motion photogrammetry-derived microtopography     

Yunxiang Chen  Roman A. DiBiase  Nicholas McCarroll  Xiaofeng Liu 《地球表面变化过程与地形》2019,44(10):1973-1987

Flow resistance in mountain streams is important for assessing flooding hazard and quantifying sediment transport and bedrock incision in upland landscapes. In such settings, flow resistance is sensitive to grain-scale roughness, which has traditionally been characterized by particle size distributions derived from laborious point counts of streambed sediment. Developing a general framework for rapid quantification of resistance in mountain streams is still a challenge. Here we present a semi-automated workflow that combines millimeter- to centimeter-scale structure-from-motion (SfM) photogrammetry surveys of bed topography and computational fluid dynamics (CFD) simulations to better evaluate surface roughness and rapidly quantify flow resistance in mountain streams. The workflow was applied to three field sites of gravel, cobble, and boulder-bedded channels with a wide range of grain size, sorting, and shape. Large-eddy simulations with body-fitted meshes generated from SfM photogrammetry-derived surfaces were performed to quantify flow resistance. The analysis of bed microtopography using a second-order structure function identified three scaling regimes that corresponded to important roughness length scales and surface complexity contributing to flow resistance. The standard deviation σ_z of detrended streambed elevation normalized by water depth, as a proxy for the vertical roughness length scale, emerges as the primary control on flow resistance and is furthermore tied to the characteristic length scale of rough surface-generated vortices. Horizontal length scales and surface complexity are secondary controls on flow resistance. A new resistance predictor linking water depth and vertical roughness scale, i.e.  H/σ_z, is proposed based on the comparison between σ_z and the characteristic length scale of vortex shedding. In addition, representing streambeds using digital elevation models (DEM) is appropriate for well-sorted streambeds, but not for poorly sorted ones under shallow and medium flow depth conditions due to the missing local overhanging features captured by fully 3D meshes which modulate local pressure gradient and thus bulk flow separation and pressure distribution. An appraisal of the mesh resolution effect on flow resistance shows that the SfM photogrammetry data resolution and the optimal CFD mesh size should be about 1/7 to 1/14 of the standard deviation of bed elevation. © 2019 John Wiley & Sons, Ltd.  相似文献   

基于污染负荷核算的岷江流域总磷污染成因分析及对策     

温泉  马迎群  时瑶  迟明慧  秦延文  刘志超  杨晨晨 《地学前缘》2020,27(4):332-339

总磷是长江流域水环境污染的首要超标因子,岷江作为长江上游流量最大的支流,总磷污染严重,对长江总磷污染贡献较大。为了解岷江流域总磷污染,采用排污系数法,计算得到2016年岷江流域污染源总磷入河量为1 154 t,以农村生活污染负荷占比最高(51.3%),其次为城镇生活源(28.7%)、农业非点源(8.24%)、工业源(9.57%)、畜禽养殖源(1.21%),城市径流源(0.99%)最低;在空间上岷江流域总磷污染负荷呈中游(64.2%)>下游(32.6%)>上游(3.1%)的特点,与岷江干流总磷浓度变化趋势相符,其中成都市总磷污染负荷最高(51.2%),与区域人口密度高、生产和生活活动密集有关。结合资料收集和现场调查,岷江流域总磷污染成因主要包括农村生活污染治理缺口较大、城镇生活污染处理基础设施建设不足、工业企业密布、部分支流总磷污染严重、水污染治理导向不全面。针对岷江总磷污染负荷分布特征及成因,提出“上游保护优质水体、中游治理重污染水体、下游恢复不达标水体”的分区污染防治对策,统筹流域监管体制机制,强化岷江流域水环境保护和治理。  相似文献   

华南上扬子区深部温度估算及其油气地质意义     

李香兰  刘绍文  徐明  李旭东  郝春艳 《地质学报》2020,94(6):1896-1910

盆地热体制及深部温度估算对油气和区域地热能资源评估具有重要意义。南方上扬子区是海相油气勘探的重要区块,近年来更是我国页岩气勘探的主要选区。然而,由于数据不足及研究目标的分散,该区的盆地热体制特征还有待深化。结合前人已有地热数据,并整合新近开展的稳态测温数据,我们揭示了上扬子区现今地温梯度、大地热流分布特征,继而估算了1000～6000m埋深处的深部地层温度和2套主要古生界海相烃源岩底界面处的温度。结果表明,上扬子区具有中-低温的地热状态,其现今地温梯度和大地热流的范围(平均值)分别为10～74℃/km(24℃/km)和27～118mW/m~2(64mW/m~2),整体上从东北向西南方向递增,呈现出"东北低、西南高"的分布趋势。1000～6000m埋深处估算温度的分布格局与地温梯度及热流的分布趋势基本一致。东北部的鄂西-湘北地区为低温区,中部的四川盆地其大部分为中温区,西南的云南地区为高温区。上扬子区现今地热分布格局受区域差异构造和岩浆作用控制。结合储层温度估算并综合其他油气地质资料,提出川东的石柱-涪陵、川南的威远-自贡-泸州和宜宾-长宁等区的下志留统龙马溪组页岩层系是上扬子区油气勘探有利区带。  相似文献   

Feedback control system for blow-out preventer positioning     

《Applied Ocean Research》2019

During the drilling of ultra-deep-water subsea petroleum wells, a blow-out preventer (BOP), a piece of safety equipment, must be assembled on the wellhead. The BOP is suspended using the drilling riser during the wellhead approach operation, and the riser's top end is connected to the floating platform rig. This article presents a feedback control system for the automatic approach of the BOP to the wellhead. Compared to state-of-the-art controls, ours does not require ancillary thrusters installed alongside the riser nor inclination sensors atop of the drilling riser. Additionally, our proposed control embeds a closed-loop dynamic positioning system, thus retaining the characteristics of the original control system and adding an extra closed-loop. This eases implementation of the BOP approach control to an existing platform. To calculate the optimal gains for the BOP controller, we assume a linear system for the riser, including only the pendulum-shape. The simulation is carried out using nonlinear models for both riser and floating platform. We assume an International Towing Tank Conference standard semi-submersible platform, coupled with a 3000-m free-hanging vertical riser for the time-domain simulation. The results show the BOP tracking to be a step-shaped input signal under current and wave loads. A discussion of the performance of feedback control under different environmental loads is also included.  相似文献   

Experimental Study of a Command Governor Adaptive Depth Controller for an Unmanned Underwater Vehicle     

《Applied Ocean Research》2019

Unmanned Underwater Vehicles (UUVs) are increasingly being used in advanced applications that require them to operate in tandem with human divers and around underwater infrastructure and other vehicles. These applications require precise control of the UUVs which is challenging due to the non-linear and time varying nature of the hydrodynamic forces, presence of external disturbances, uncertainties and unexpected changes that can occur within the UUV’s operating environment. Adaptive control has been identified as a promising solution to achieve desired control within such dynamic environments. Nevertheless, adaptive control in its basic form, such as Model Reference Adaptive Control (MRAC) has a trade-off between the adaptation rate and transient performance. Even though, higher adaptation rates produce better performance they can lead to instabilities and actuator fatigue due to high frequency oscillations in the control signal. Command Governor Adaptive Control (CGAC) is a possible solution to achieve better transient performance at low adaptation rates. In this study CGAC has been experimentally validated for depth control of a UUV, which is a unique challenge due to the unavailability of full state measurement and a greater thrust requirement. These in turn leads to additional noise from state estimation, time-delays from input noise filters, higher energy expenditure and susceptibility to saturation. Experimental results show that CGAC is more robust against noise and time-delays and has lower energy expenditure and thruster saturation. In addition, CGAC offers better tracking, disturbance rejection and tolerance to partial thruster failure compared to the MRAC.  相似文献   

Hydrological management strategies for the control of algal blooms in regulated lowland rivers     

Jian Li  Wei Yin  Haiyan Jia  Xiaokang Xin 《水文研究》2021,35(6):e14171

Reservoirs of lowland floodplain rivers with eutrophic backgrounds cause variations in the hydrological and hydraulic conditions of estuaries and low-dam reservoir areas, which can promote planktonic algae to proliferate and algal bloom outbreaks. Understanding the ecological effects of variations in hydrological and hydraulic processes in lowland rivers is important for algal bloom control. In this study, the middle and lower reaches of the Han River, China, a typical regulated lowland river with a eutrophic background, are selected. Based on the effect of hydrological and hydraulic variability on algal blooms, a hydrological management strategy for river algal bloom control is proposed. The results showed that (a) differences in river morphology and background nutrient levels cause significant differences in the critical threshold flow velocities for algal bloom outbreaks between natural river and low-dam reservoir sections; there is no uniform threshold flow velocity for algal bloom control. (b) There are significant differences in the river hydrological/hydraulic conditions between years with and without algal blooms. The average river flow, water level and velocity in years with algal blooms are significantly lower than those in years without algal blooms. (c) For different river sections where algal blooms occur and to meet the threshold flow velocities, the joint operation of cascade reservoirs and diversion projects is an effective method to prevent and control algal blooms in regulated lowland rivers. This study is expected to deepen our understanding of the ecological significance of special hydrological processes and guide algal bloom management in regulated lowland rivers.  相似文献   

The recognition of former melt flux through high‐strain zones          下载免费PDF全文

Catherine A. Stuart  Sandra Piazolo  Nathan R. Daczko 《Journal of Metamorphic Geology》2018,36(8):1049-1069

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.  相似文献   

Real‐time force control for servo‐hydraulic actuator systems using adaptive time series compensator and compliance springs     

《地震工程与结构动力学》2018,47(4):854-871

Servo‐hydraulic actuators have been widely used for experimental studies in engineering. They can be controlled in either displacement or force control mode depending on the purpose of a test. It is necessary to control the actuators in real time when the rate‐dependency effect of a test specimen needs to be accounted for under dynamic loads. Real‐time hybrid simulation (RTHS) and effective force testing (EFT) method, which can consider the rate‐dependency effect, have been known as viable alternatives to the shake table testing method. Due to the lack of knowledge in real‐time force control, however, the structures that can be tested with RTHS and EFT are fairly limited. For instance, satisfying the force boundary condition for axially stiff members is a challenging task in RTHS, while EFT has a difficulty to be implemented for nonlinear structures. In order to resolve these issues, this paper introduces new real‐time force control methods utilizing the adaptive time series (ATS) compensator and compliance springs. Unlike existing methods, the proposed force control methods do not require the structural modeling of a test structure, making it easy to be implemented especially for nonlinear structures. The force tracking performance of the proposed methods is evaluated for a small‐scale steel mass block system with a magneto‐rheological damper subjected to various target forces. Accuracy, time delay, and resonance response of these methods are discussed along with their force control performance for an axially stiff member. Overall, a satisfactory force tracking performance was observed by using the proposed force control methods.  相似文献